Products
Metal welded mesh is a mesh structure material formed by welding metal wires through resistance welding or arc welding. It is widely used in construction, breeding, protection, transportation, and other fields.
Core Overview
Metal welded mesh uses metal wire as raw material. Horizontal and vertical wires are welded and fixed at intersection points through automated welding equipment, forming a regular grid‑shaped product. Its core advantages are stable structure and strong integrity. Mesh size, wire diameter, and overall dimensions can be customized according to needs to adapt to load‑bearing, protection, or isolation requirements of different scenarios.
Process Flow
The production process of metal welded mesh is highly standardized and divided into 5 core steps. Each link directly affects product quality:
1. Raw material pre‑treatment – Metal wire rods (iron wire, steel wire) are straightened to remove surface rust or oil stains. If anti‑corrosion is required, some materials undergo preliminary galvanizing treatment.
2. Wire diameter cutting – Straightened wires are cut into transverse wires (short) and longitudinal wires (long) at fixed lengths according to specifications.
3. Automated welding – A CNC welding machine arranges transverse and longitudinal wires at set mesh spacing. Resistance welding (mainstream – high efficiency, strong joints) or arc welding is used at intersections to form the mesh body.
4. Post‑processing – Anti‑corrosion treatment (hot‑dip galvanizing, cold‑dip galvanizing, plastic spraying, or dip coating). Some construction mesh is cut to fixed size, with reinforced ribs added to edges.
5. Inspection and packaging – Solder joint firmness, mesh accuracy, and anti‑corrosion layer quality are checked. Qualified products are stacked and packaged for transport.
Main Features
Stable structure – Intersection points are welded and fixed – no loosening or shifting. Overall load‑bearing capacity exceeds that of woven mesh.
Controllable precision – Mesh size, wire diameter, and mesh dimensions are accurately adjustable via CNC equipment with minimal error.
Easy to install – Lightweight, good toughness, can be cut or spliced directly without complicated tools.
Strong durability – After galvanizing or plastic spraying, it withstands moisture, acid, and alkali environments with long service life.
Table 1 – Common Materials
| Material Type | Core Features | Applicable Scenarios |
|---|---|---|
| Low‑carbon steel wire | Low cost, good toughness, needs anti‑corrosion treatment | Construction plastering mesh, temporary protective netting, breeding nets |
| Hot‑dip galvanized steel wire | Thick zinc layer, strong anti‑corrosion, 5‑10 years service life | Outdoor protective nets, highway isolation nets, breeding nets |
| Cold‑dip galvanized steel wire | Thin zinc layer, lower cost, medium corrosion resistance | Indoor protective nets, mildly humid environments |
| Stainless steel wire (304/316) | Acid/alkali resistant, corrosion‑resistant, high cost | Chemical site protection, food processing isolation nets |
| Black iron wire (not galvanized) | No anti‑corrosion layer, prone to rust, very low cost | Temporary support nets, single‑use scenarios |
Table 2 – Key Specifications
| Parameter | Common Range | Application Example |
|---|---|---|
| Mesh size | 5×5mm (fine) to 200×200mm (large protection) | 20×20mm, 50×50mm – breeding nets |
| Wire diameter | 0.5mm – 12mm | Construction: 1‑3mm; heavy‑duty protection: 6‑12mm |
| Mesh sheet size | 1×2m, 1.2×2.4m (standard); up to 5×10m (custom) | Rolled length: 50‑100m; width: 1‑2m |
Why Choose Our Metal Welded Mesh?
-
This metal welded mesh combines stable structure, customizable specifications, and durable anti‑corrosion finishes – suitable for construction, breeding, outdoor protection, and industrial isolation.
Need a custom metal welded mesh for your specific project? Contact us with your mesh size, wire diameter, and dimensions – we will recommend the right solution.

Hot Tags: metal welded mesh, China metal welded mesh manufacturers, factory

